Pretty Good Polish...
|
From this |
To this |
|
|
|
In just 94 hours!
(Over several months....)
I went to an Airstream rally in Calistoga, CA earlier this year (2003) and watched a brief polishing demo. They used the Perfect Polish method of a compound polisher followed by a cyclo using Nuvite products. The demonstration gave me the idea that I should try this. Didn't look too hard ;-)
I won't go into the methods used since there are many websites out there describing how to polish an Airstream. But I will say that the Nuvite product is very good and I would use it again.
Here are some photos of my work.
| Filform corrosion. What can I say, Yuck! This stuff made my work much harder. To get rid of this I had to use the compounder ( a low speed half inch drill with a wool buffing pad) over the area about 10 times! |
Compounder in action! |
|
|
|
|
Look at that shine!
|
Working on the top! |
|
|
|
Cyclo In Action.
Requires Real Player